找回密码

返回登录 |  立即注册

注册或登录,即表示同意和接受本站 免责条款法律声明 。 ©Copyright 2018. CISALL Team 麦研品牌策划(上海)有限公司 版权所有

注册CISALL-System账号

已有账号? | 直接登录

注册或登录,即表示同意和接受本站 免责条款法律声明 。 ©Copyright 2018. CISALL Team 麦研品牌策划(上海)有限公司 版权所有

Product Description

Take a project paper machine auxiliary control system as an example

This control system is a set of networked automatic control system. It uses PROFIBUS-DP/Ethernet fieldbus as the control network, and PLC as the central controller. The control and monitoring signals are collected on-site through Siemens' remote I/O and placed on the operating platform. The ET200 I/O installed on the console acts as a slave station and exchanges data with Siemens S7 series PLC through a network adapter. Its I/O signal is provided to the CPU through the field control bus. MCS and DCS communication: as a DP slave station to communicate with the DCS system.

Features:

Simplify the complicated wiring method on site and facilitate future maintenance. Each auxiliary drive motor in the system has operation functions such as start, stop (or tighten or loosen) and operation instructions, and each point has perfect short circuit, overload and stroke P. Protection (if necessary). Some circuits also have interlocking/unlocking, operation/maintenance conversion or input/removal functions. The supply of MCS includes all interlocking control points (proximity switches, photoelectric switches, etc.) on the paper machine from the wire section to the coiler, and hydraulic control Point and alarm device, paper break detection, limit, etc.

Technical index:

1. Environmental conditions

Location: Indoor

Altitude: Below 1000m AMSL without derating

Humidity: 5% to 95%, non-condensing

Storage temperature: -40℃ to +65℃

Ambient temperature: -5℃ to +40℃

2. AC power supply:

Control voltage: AC 220V

Voltage error: +/-15%, maximum

Frequency error: +/-5%, maximum

Phase imbalance: +/-2%, maximum

3. DC power supply: DC24V

4. Grid frequency: 50HZ

Product Model

Download

相关解决方案

产品应用案例

在线客服